Discount applied automatically at checkout.
Your kid draws a dinosaur. Then picks it up.
The pen warms up in under a minute, feeds in a strand of coloured filament and lays down a line that hardens as it leaves the tip. Trace the templates that come in the box to get the hang of it, then go freehand — name signs, flowers, bugs, tiny buildings, school project pieces. Flat drawings peel off the tracing board and stand up on their own.
Every kit comes with the pen, tracing paper and a tracing board, a cleaning needle, a USB charging cable, starter filament and the manual. The Value Kit adds a bundle of extra filament rolls in assorted colours, 5 metres each — three dollars for the kid who will burn through the starter set in a weekend.
Worth knowing before you buy. Rated ages 8+ — the tip is heated and the filament is small, so this is not a toddler toy. Sit with them for the first few sessions while they learn how the tip behaves. Filament is a consumable; refills are standard 1.75 mm PLA and sold everywhere.
My nine year old sat at the kitchen table all afternoon making a house. Nobody asked for the iPad once. That has not happened in about two years.
He copied a dragonfly first, got a feel for how fast the tip moves, and was drawing his own stuff by the second day.
We burned through the starter filament in a weekend. The extra three dollars for the Value Kit is the obvious move, I wish I had done it.
Draw on the tracing board, wait ten seconds, lift. Clean every time, nothing sticks or tears.
He is using it to patch a cracked plastic bin in the garage. Apparently that is a thing people do with these.
My seven year old holds it like a fat pencil. His grip does not shake the way it did with the chunky one we borrowed from a friend.
Charges off the same cable as everything else in this house. One charge got us through a whole rainy Saturday.
The pen is good. The booklet is four pages of bad translation. I worked out the speed control by pressing things.
She had to build a model of a bridge. Made the whole thing with this instead of cardboard and glue, and it actually held weight.
The tip is hot, the body stays cool. We went over the rules once and he has been careful since.
We had a forty dollar pen last year that jammed constantly. This one costs half and has not clogged yet.
Got two greens and no yellow. Not the end of the world but worth knowing if your kid has a favourite colour.
Our OT suggested something like this for hand control. He thinks he is playing, she is delighted with the progress.
Had enough charge to use immediately. We were making shapes twenty minutes after the parcel landed.
Bought a second one in a different colour so they each have their own. Cheap enough that it was an easy call.
Flat tracing is easy on day one. Building upward took him about a week to get the hang of, and he was proud when it clicked.
I was braced for a hot plastic stink. There is a faint warm smell and that is it, even with the windows shut.
Standard 1.75 mm PLA, the same spools people buy for 3D printers. Not locked into one brand at a silly price.
He was going too slow and it gummed up. Poked it with the cleaning needle that comes in the box and it was fine again in a minute.
I am seventy one and I use it more than my grandson. We make things together on Sundays now.
Slow for careful outlines, fast for filling shapes in. My daughter figured out which to use on her own.
Most gifts are dead by the following weekend. Three weeks later this is still on his desk.
We used it for a geometry unit — building the shapes instead of drawing them made it stick in a way worksheets never did.
Plugged it in after dinner, ready before bed. Gets us through a long session before it needs another top-up.
She had it worked out before I read a word of the instructions. Then she showed me how to do the layering.
Everything in its own slot, nothing loose rattling around, and the parcel arrived in five days.
It says 8+ and it means it. My youngest was frustrated and the tip makes me nervous with her. Perfect for the older one.
There is a soft motor noise when the filament feeds and nothing else. We use it while the TV is on.
There is a shelf of tiny plastic creatures with names now. I am not allowed to throw any of them away.
Twenty dollars and it has held his attention longer than the last game we bought him at sixty.
Took it to the caravan for a wet week in Wales. Saved us.
A minute or so after switching off it is safe to pack away. Less standing around waiting than I expected.
Got four for my classroom art corner. Simple enough that I am not troubleshooting twenty pens instead of teaching.
No complaints about the hardware. There just is not much filament in the basic box, so order refills at the same time.
Smooth enough that the plastic lifts cleanly and does not weld itself to the surface. I would not want to do this on a table.
Forty minutes of focus on one project. I genuinely did not expect that and neither did his teacher.
It does not feel like a toy that will crack. Matte body, buttons with a proper click.
Bought it for my kid, used it to weld a snapped plastic arm back together. Held up for a month of flying so far.
She opened four things that morning and this is the only one she was still using at bedtime.
My daughter is left handed and the button layout works either way. Worth mentioning because a lot of gadgets do not.
Stray plastic peels off the board and the table. Nothing has stained or stuck permanently.
Feeding the first strand in took a couple of tries. After that it is muscle memory and he loads it himself.
Bought three, one for each niece. At this price it is the easiest present decision on my list.
It has been dropped off the table twice and knocked around in a backpack. Still working.
Slightly wonky, bright green, and it is on my desk at work. Worth twenty dollars on its own.
You can keep going with it plugged in, which matters when they are mid-project and the battery dies.
I am the adult here. Using it for fences and signage on my layout and it beats buying tiny plastic parts.
No app, no pairing, no account. Charge it, load the filament, press the button.
One traces, the other joins the pieces. They built a whole village and did not argue once, which is a first.
The filament included is a good assortment but the long rolls are basic colours. Bought a rainbow pack separately for two dollars.
He never sat still for colouring books. Give him something that becomes an object and he is a different child.
Said about a week, landed in five days, box undamaged.
She specifically wanted the pink one and was delighted it was exactly the shade in the photo.
He has started asking how printers work. Cheap way to find out whether the interest is real before spending hundreds.
He grabbed near the front without thinking. The plastic collar around the nozzle meant he got a warning, not an injury.
We are making snowflakes for the tree. Traced the first few, freehanded the rest.
Used hers over a weekend visit and ordered one before I got home.
I am sensitive to plastic smells and this does not trigger it. That was my main worry before buying.
Three dollars more for a proper bundle of filament. Do not bother with the smaller one, you will just be ordering again.
Used most days since we got it. No drop in flow, battery still holds the same time as week one.
Orders ship within 1–2 business days and arrive in 4–8 business days.
Email hello@dangtapdibay.store — we reply within 24 hours.
Trace a shape on the board, peel it off, join the pieces and it holds its own weight. Houses, towers, cars, butterflies — the drawing becomes an object you can pick up and put on a shelf.
Printed templates come in the box so the first attempt is not a blank page. Children copy a pattern, get a feel for the speed of the tip, then start inventing their own shapes within an afternoon.
Slim pencil-shaped body, light enough that a child is steering rather than wrestling it. The flow is smooth instead of stuttering, which is what makes cheap pens frustrating to use.
It charges over USB and runs off its own battery, so it works at the kitchen table, on the floor or in the back seat. Nothing tethering them to a wall socket.
Starter filament comes in the box and the Value Kit adds a bundle of 5 m rolls. Refills are standard 1.75 mm PLA — the same spools sold for school 3D printers, so you are never locked into one brand.
The tip gets hot while it works. Use it with an adult nearby, never wrap filament around a neck or wrist, charge only with the supplied cable, and stop using it if the cable is damaged.
